Package Content - Unify Atos OpenScape CP210 Installations- Und Kurzanleitung

Package Content

OpenScape Desk Phone CP210
Stands
Handset
Handset cable
Installation and Quick Reference Guide
Notes about Place of Use
• Operation of a SIP telephone is only permitted with indoor
LAN cabling. The device shall be connected to the IP infra-
structure using a shielded LAN cable: Cat-5 for 100 Mb/s or
Cat-6 for 1000 Mb/s. The LAN cabling of the building shall
ensure that the shield of this cable is grounded.
• The telephone should be operated in a controlled environ-
ment with an ambient temperature between 5 °C
and 40 °C (41 °F and 104 °F).
• Do not install the telephone in a room where large quantities
of dust accumulate; this can considerably reduce the service
life of the telephone.
• Do not expose the telephone to direct sunlight or any other
source of heat, as this is liable to damage the electronic
equipment and the plastic casing.
• Do not operate the telephone in damp environments such as
bathrooms.
Connect the Handset to the Telephone
See also overview on page 2.
1. Insert the plug on the long end of the handset cable
jack on the base of the telephone and press the cable into
D
the groove provided.
2. Insert the plug on the short end of the handset cable
the jack on the handset
10
.
into the
into