HOT AIR VENTILATOR
SAFETY INSTRUCTIONS
Read carefully and save for future use!
Warning: The safety measures and instructions, contained in this
manual, do not include all conditions and situations possible. The user
must understand that common sense, caution and care are factors that
cannot be integrated into any product. Therefore, these factors shall
be ensured by the user/s using and operating this appliance. We are
not liable for any damages caused during shipping, by incorrect use,
voltage fluctuation or the modification or adjustment of any part of the
appliance.
To protect against a risk of fire or electric shock, basic precautions shall
be taken while using electrical appliances, including the following:
1. Make sure the voltage in your outlet corresponds to the voltage
provided on the appliance label and that the socket is correctly
grounded. The outlet must be installed in accordance with applicable
electrical codes according to EN.
2. Do not operate the heat convector without the base properly
attached.
3. Do not operate the device if the cord is damaged. All repairs,
including cord replacements, must be carried out at a professional
service centre! Do not remove the protective covers from the
appliance; there is a risk of electric shock!
4. Protect the device from a direct contact with water and other liquids
in order to prevent injury from electrical shock.
5. Do not use the convector outside or in wet environment and do not
touch the power cable or the device with wet hands. Risk of electric
shock.
6. Be cautious when using the convector near children!
7. Make sure the convector is placed on a flat surface.
8. Do not use the convector close to flammable objects or underneath
them, e.g. curtains. The temperature of the surfaces near the
convector may be higher while it is in operation than usual. Place
the convector to ensure sufficient air circulation.
4