Operating The Toggle Switches; Setting The Time; Switching The Appliance On And Switching To Standby Mode - hanseatic 65M90D0-E11319G Gebrauchsanleitung

Page EN-34 Installation and connection

Operating the toggle switches

The toggle switches (9) and (14) are retract-
able. When pushed in they are level with the
control panel.
• Press the centre of the toggle switches to
operate them. To hide it again, push it in.

Setting the time

Set the clock:
– if the oven has been newly connected;
– after a power failure.
If the oven has been newly connected, or af-
ter a power failure, the display will show the
following:
12 30 88 88
A A
How to set the clock:
(17)
88 88 12 30
A
(10) (11) (13)
1. Press the button (10) or the
ton (13), several times if necessary, to set
the hour.
2. Now press the button (11).
The minute indicator will start to flash.
3. Press the button (10) or the
ton (13), several times if necessary, to set
the minute.
4. Press the button (11) again.
The indicator stops flashing; the time has
been set. The appliance is now in standby
mode.
Switching the appliance on and
switching to standby mode
(17)
88 88 12 30
A
(10) (11) (13)
The display will show this image in standby
mode.
To switch the appliance
• on, press the button (11) for approxi-
mately 3 seconds.
The power indicator
• to standby mode, press the
(13) buttons simultaneously for ap-
proximately 3 seconds.
The power indicator
lighting will turn off.
but-
but-
(17) now lights up.
(11) and
(17) and interior