Power Input - LD Systems MAILA COL Bedienungsanleitung

POWER INPUT

1
PowerCON TRUE1 Mains input socket. A suitable mains cable is included in the scope of delivery
INPUT
2
Balanced line input with lockable female 3-pin XLR connector.
THRU
3
Balanced line output for forwarding the line input signal (male 3-pin XLR socket).
LC-DISPLAY
4
Multifunctional graphic LC display with illumination.
PUSH TO ENTER / HOLD TO MUTE
5
Rotary-push encoder for navigating in the main menu and submenus and for adjusting system settings.
Select the individual menu items in the main menu and in the submenus by turning the encoder and
confirm the selection by pressing the encoder. Change a numerical value or status in a menu item
by turning the encoder and confirm the change by pressing the encoder. To move up one level in the
menu structure, select the arrow symbol < and confirm the selection.
Press the encoder for about 2 seconds to mute the speaker column and again for about 2 seconds to
unmute it.
LEDS TO INDICATE THE STATUS OF THE UNIT
6
PWR - (Power) The white indicator LED lights up when the unit is correctly connected to the mains and
switched on.
SIG - (Signal) The white indicator LED lights up when an audio signal is present at the unit.
LIMIT - (Limiter) The yellow indicator LED lights up when the amplifier module is operated in the upper
limit range. A short flash of the LED is not critical. To protect the system, an excessive signal level is
gently reduced by the integrated limiter. If the limiter LED lights up for a longer time or permanent-
ly, reduce the volume level.
PROT - (Protect) The red indicator LED lights up if the amplifier module is overloaded or overheats.
The amplifier module is automatically muted. After reaching normal operating conditions, the unit
switches back to normal operating mode after a few minutes.
VENTS
7
To prevent damage to the unit, do not cover the ventilation openings on the back and ensure that air
can circulate freely.
PUSH TO UNLOCK SAT
8
On the rear upper edge of the speaker column is the release button for detaching a mounted satellite
speaker.
RETAINING BUSHES & STEEL BOLTS
On the underside of the speaker column are the retaining sockets for the EasyMount+ flying bracket
LD MAILA TMB and the steel bolts for mounting the column on the subwoofer LD MAILA SUB and also an
M20 knurled screw for securing to the subwoofer.
11