Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Trouble shooting
Problem
Appliance
won't start
Intermittent
operation
Weak or no
suction power/
throughput
Impeller does
not move
Possible cause
No mains power supply
Worn out carbon brushes
Motor faulty
On/Off switch (
The suction tubes (
collection bag (
blower tubes (
9) and protec-
tive cover (
7) are not cor-
rectly mounted.
Internal loose contact
Power cable damaged
On/Off switch (
Collection bag (
Collection bag (
Impeller, blower or suction pipe
(
9/17) is clogged or blocked
Foreign body blocking the impel-
ler
Corrective action
Check the socket, cable, line, plug
and fuse and have them repaired
by a qualified electrician if neces-
sary.
Send in to Service Centre for re-
pair
4) defective
17) and
14), and/or
See the section on „Initial start-up"
Send in to Service Centre for re-
pair
4) defective
Empty collection bag
14) is full
Clean collection bag
14) is dirty
see „Removal of clogging
and blockage"
Remove the blockage (see „Re-
moval of clogging and blockage")
GB
79
Werbung
Inhaltsverzeichnis
Fehlerbehebung
