Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
General safety requirements
`
`
Read these directions for use carefully before using.
`
`
Keep these directions for use where they will be
accessible for all users.
`
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
`
The instrument must only be used by qualified
skilled employees.
Safety instructions before using
`
`
Follow the manufacturer's instructions and safety
instructions of the medium you are filling.
`
`
Damage to the respiratory tract and other organs
due to off-gassing media. Fill only in ventilated
rooms or under a suitable exhaust hood.
`
`
When working with explosive substances, follow the
technical rules for combustible liquids (in accordan-
ce with TRBF – (German) Technical Rules on Com-
bustible Liquids) and wear appropriate protective
equipment (zone 0, see annex).
WARNING!
Possible sparking due to electrostatic discharge.
Danger of explosion if combustible liquids are
used.
`
`
Connect the earthing terminal before use (see
accessories).
`
`
Wear the necessary protective clothing.
`
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
NOTE!
Before using, the instrument has to be cleaned to
the extent of your (validated) cleaning process.
`
`
Measures of manual cleaning have to be carried
out in the cleaning/desinfection area and under
consideration of occupational health and safety.
`
`
Pay attention to the material resistance.
Safety instructions during and after use
`
`
The instrument generates overpressure. Possible
bodily injury due to escaping liquids. Hold the shut-
off valve on the discharge tube closed.
`
`
The instrument generates overpressure. If there are
differences in pressure, loud popping noises can be
heard with some types of containers.
`
`
The instrument is not suitable for cleaning in a
dishwasher.
Layout and function
`
`
The instrument is made of conductive material
(1.4301).
`
`
The instrument is suitable for filling combustible
liquids in accordance with groups IIA and IIB (see
annex).
`
`
Always use the instrument with pressure-resistant
containers (up to 60 l, >1 bar) for filling into open
containers (<1 l).
`
`
When filling combustible liquids, always use an
antistatic set (see accessories).
`
`
The instrument is maintenance-free and suitable at
a temperature range from 0 to 60 °C.
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
WARNING!
Possible electrostatic discharge. Danger of explosi-
on if combustible liquids are used.
`
`
Connect the earthing terminal before use (see
accessories).
`
`
Wear the necessary protective clothing.
WARNING!
Some liquid will continue to run. Bodily injury due
to escaping liquid.
`
`
Close the shut-off valve on the discharge tube
before mounting.
Assembly
1. Guide the barrel screw connection and riser pipe
with the discharge tube into the container and
screw it together finger-tight.
2. If necessary adjust the riser pipe.
Werbung
