Venga VG COG 3003 Bedienungsanleitung Seite 3

Let the appliance cool down before cleaning or storing it.
❑
Stand the appliance on a table or flat surface to prevent it from
❑
falling down.
Make sure the cord does not come into contact with the hot
❑
parts of the appliance.
The temperature of the accessible surfaces may be very high
❑
when the appliance is in use. Never touch these hot surfaces.
Make sure the appliance never comes into contact with
❑
inflammable materials, such as curtains, cloth, etc. when it is
in use, as a fire might occur.
Be careful not to scratch the special coating of the baking
❑
plates, as you might get little pieces of this coating into the
food. Use a classical wooden spatula or a heat-resistant plastic
one.
Always unplug the appliance when it is not in use, especially
❑
since it is not equipped with an on/off switch.
Only use the appliance for food that is supposed to be cooked.
❑
Your appliance must never be switched on through an external
❑
timer or any kind of separate remote control system.
Please note: Should the symbol
❑
surface, you need to be careful when handling the product.
This symbol means: CAUTION, this surface may get very hot
during use.
The symbol
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
concerning the temperature of a certain surface it is always
preferable to protect oneself.
(*) Competent qualified electrician: after-sales department of the
producer or importer or any person qualified, approved and
competent to perform this kind of repairs in order to avoid all
danger. In case of need return the appliance to this electrician.
is always put on the surface with the highest
be indicated on a certain
3 VG COG 3003