Technical Data - Anslut 019884 Bedienungsanleitung

EN

TECHNICAL DATA

Rated voltage
Output
Protection rating
Energy class
Luminous flux
Colour temperature
Dimmable
Life span
INSTALLATION
1. Switch off the power supply.
2. Remove the cover from the lamp housing.
3. Use the bracket as a template to mark out the mounting
holes and drill holes in these positions. Put expander plugs
in the holes. Screw on the bracket.
4. Fit the lamp housing on the bracket.
5. Connect the live wire L (brown), neutral wire N (blue) and
earth wire (yellow/green).
20
Approved in accordance with the relevant
directives.
Recycle discarded product as electrical waste.
230 V ~ 50 Hz
30 W
IP65
F
2550 lm
4000 K
No
25000 h