VINCENT SV-237MKII Bedienungsanleitung Seite 44

Check whether the wall socket provides the appropriate mains power, which is the case if it is supplied
with 230 V AC 50 Hz. Push the plug on the power cable supplied firmly into the power socket (17) on
the back of the appliance. Plug the other end of the power cable into a mains socket.
This device is equipped with a switch (20) that can be used to change the country-specific voltage from
230 V to 110 V.
Please never actuate the switch during operation! The voltage must only be swit-
ched by a technician, since the device fuse must also be replaced after actuation of the
switch! Information about the device fuse can be found on the back of the device.
Unauthorised actuation of the switch will void any warranty claim!
44
CONNECTION OF THE POWER CABLE
SWITCHING THE VOLTAGE