Herunterladen Inhalt Inhalt Diese Seite drucken

Commissioning, Operation - bopro Floorboy Z12s Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Commissioning / operation
Please remember that the voltage in the building being
cleaned must concur with that given on the machine's type
plate.
1.1 Where to use Floorboy for cleaning and
polishing
☞ Hard floors and staircases, oiled or sealed parquetry,
plastic floors and PVC, linoleum , earthenware slabs,
clinkers, tiles, natural and cast stone, magnesite
composition etc...
1.2 Application cleaning
☞ Filllye bottle (4) with floor
1
3
4
☞ After having finished work,
13
18
17
21
1.3 Application polishing
☞ Use Clean & Polish spray for the surface, work it in
with the Cleanfx Floorboy and a polishing pad and
polish up.
☞ After having finished work, separate the Cleanfix
Floorboy from driving dise plate and polishing pad to
ensure that the machine never keeps standing on the
polishing pad.
2.
Important Notes
To prevent damage to the appliance, follow the instruc-
tions carefully. safety note!
Do not pull on the electrical supply cable to remove the
plug from the socket!
Only the
manufacturer's
agents.
Never leave the machine standing on the polishing,
cleaning or micro fibre pad after use.
The pads will be squeezed by the one-sided weight of
the machine , and smooth working can not be realized
anymore. The pad has to be replaced in that case .
Floorboy Z12s
cleaning
agent
and
water
(dosage 1:10) and pulliock
button (3) upwards. Put the
driving dise plate (17) with the
cleaning pad (21) or the micro
fibre pad (18) on the floor and
place the Cleanfix FoorMac
into it. Press the control deviee
(1) until the first drops from the
lye bottle are on the floor, then
tum on the appliance switch
(13) and make use of the
product immediately.
press lock button (3) on the lye
bottle (4) downwards.
Separate the Cleanfix FoorMac
from driving dise plate and pad
to ensure that the machine
never keeps standing on the
cleaning, polishing or micro
fibre pad.
recommended
cleaning
2.
Important Notes
Lifting the machine allows the pad and the driving disc
plate to be separated easily from the machine.
Attention! Press the control device for the cleaning
agent for a short time only, and make use of the product
at once drop by drop .
Large quantities of liquid can infiltrate the floor and lead
to irreparable damage.
3. Service
☞ In case of repair please contact lhren specialist
wholesaler or one of the approved service agents.
You will be served quickly and professionally.
Attention! This machine is intended only for the use on
plain surfaces with a maximal gradient of up to 2%.
Attention! The use of this machine on public ways and
streets is not allowed.
4. Maintenance
Instructions
it is imperative to observe the following notes:
☞ For cleaning and maintenance of the machine, the
replacement of parts , or switching to another function
the drive has to be shut off and the mains connection
must be unplugged.
☞ The mains lead must not be injured or damaged by
either crossing, squeezing, straining or anything similar.
☞ The mains lead has to be checked regularly for
indications of damaging.
☞ The machine must not be used if the mains lead is not
in a faultless condition.
☞ For the use or replacement of mains leads or cord sets
the notes given by the manufacturer must be strictly
observed.
☞ For the replacement of couplings of mains leads or
cord sets splash protection and rnechanical strength
have to remain ensured.
☞ For transport in lifts the handle/pole of the machine is
to be placed upright to prevent it from getting stuck on
the hoistway walls.
☞ Sprays and cleaning agents which are not suited for
the intended purpose of the appliance must not be
used.
☞ Never use substances which are highly inflammable,
combustible, toxic, hazardous to health, caustic or
irritating.
☞ Corrective maintenance inclusive of the integration of
spray leads and hoses may only be carried out by
approved after-sales service points or competent
qualified personnel being familiar with all relevant
safety regulations.
5. Storage
If the machine is not to be used it should be stored in a dry
room which is always above 0° C.
Final remark
Subject to changes within the framework of technical
progress!!
Englisch 10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis