SANUSLIFE ECAIA ionizer S Bedienungsanleitung (Kurzversion Seite 7

3.3
Permanent connection to the angle valve (appliance in above-counter
position)
3.4 Permanent connection to the angle valve (ECAIA ionizer S+;
appliance in below-counter position; using the additional ECAIA
ionizer S tap)
Install the T-piece (A-10) on the angle
1.
valve of the cold water pipe.
Pass the tap water supply hose (A-6)
2.
through an opening in the counter or
sink (diameter at least 6 mm) to the
position where you have placed the
ECAIA ionizer S.
Connect the tap water supply hose
3.
(A-6) to the T-piece (A-10) and the wa-
ter inlet (B-11).
The water pressure can be adjusted
4.
with the adjustment screw on the
T-piece (A-10).
Install the T-piece (A-10) on the angle
1.
valve of the cold water pipe.
Connect the tap water supply hose
2.
(A-6) to the T-piece (A-10) and the wa-
ter inlet (B-11).
The water pressure can be adjusted
3.
with the adjustment screw on the
T-piece (A-10).
For further installation instructions,
4.
please refer to the complete instruc-
tions for use and the description of
the ECAIA ionizer S faucet.
7