Installation; Incoming Acceptance, Transport, Storage; Transportation And Storage; Installation Conditions - Endress+Hauser RIA46 Bedienungsanleitung

Installation

3 Installation
3.1

Incoming acceptance, transport, storage

The permitted ambient and storage conditions must be observed. The precise specifications can
be found in Section 10 "Technical data".
3.1.1 Incoming acceptance
On receipt of the goods, check the following points:
• Are the packaging or contents damaged?
• Is anything missing from the delivery? Compare the scope of delivery with the information
you specified in the order. See also section 2.2 "Scope of delivery".

3.1.2 Transportation and storage

Note the following points:
• Pack the device so that is protected against impact for storage and transportation. The original
packaging provides optimum protection.
• The permitted storage temperature range is -40 to +85°C (-40 to +185 °F); it is possible to
store the device in the limit temperature ranges for a limited period (maximum 48 hours).
3.2

Installation conditions

The process display unit is designed to be used in the field.
The orientation is determined by the readability of the display. Cable entries are located on the
bottom of the device.
Operational temperature range:
-40 to 60 °C (-40 to 140 °F)
"
Caution!
If the device is operated in the upper temperature limit range, this reduces the operating life of
the display.
!
Note!
Readability of the display cannot be guaranteed at temperatures below -30 °C (-22 °F).
26
RIA46
Endress+Hauser