Troubleshooting - Hoover H-HOOD 500 CANOPY HPY6CBK5BGWIFI Einbau- Und Bedienungsanleitung

TROUBLESHOOTING

Fault
Light on, but fan
does not work
Both light and
fan do not work
Serious
Vibration of the
unit
Suction
performance
not good
Technology
Standard
Frequency Band(s)[MHz]
Maximum Power[mW]
Product information for networked equipment
power consumption of the product in
networked standby if all wired network
ports are connected and all wireless
network ports are activated:
How to activate wireless network port:
How to deactivate wireless network port:
Cause
The fan blade is jammed.
The motor is damaged.
light bulb burn.
Power cord looses.
The fan blade is
damaged.
The fan motor is not fixed
tightly.
The unit is not hung
properly on the bracket.
Too long distance
between the unit and the
cooking plane
Switch of the unit and repair by
qualified service personnel only.
Replace the bulb with correct rating.
Plug in to the power supply again.
Switch of the unit and repair by
qualified service personnel only.
Switch of the unit and repair by
qualified service personnel only.
Take down the unit and check
whether the bracket is in proper
location.
Readjust the distance to 65-75cm
Wi-Fi
802.11 b/g/n
2400 MHz - 2483.5 MHz
100mW
2 W
If the Hood has been enrolled with the APP,
turn on the Hood to activate wireless
network port.
If the Hood has been enrolled with the APP, turn
off the Hood to deactivate wireless network port. If
the Hood hasn't been enrolled with the APP,
wireless network port will be deactivated even the
Hood is on.
13
Solution