Product Components - Hach Clean & CAL pH Mount Benutzerhandbuch

3.5 Product components

Make sure that all components have been received. Refer to
damaged, contact the manufacturer or a sales representative immediately.
Figure 2 Product components
1 Clean & Cal manifold assembly
2 Tubing, 3/8-inch ID, 9/16-inch OD, 3 m (10 ft)
3 Solution containers rack
4 Solution containers (folded)
5 Container caps with valves
6 Quick-connect fittings
3.6 Certification
EN 55011/CISPR 11 Notification Warning
This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Canadian Radio Interference-Causing Equipment Regulation, ICES-003, Class A:
Supporting test records reside with the manufacturer.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de classe A répond à toutes les exigences de la réglementation canadienne
sur les équipements provoquant des interférences.
FCC Part 15, Class "A" Limits
Supporting test records reside with the manufacturer. The device complies with Part 15 of the FCC
Rules. Operation is subject to the following conditions:
1. The equipment may not cause harmful interference.
2. The equipment must accept any interference received, including interference that may cause
undesired operation.
Figure 2. If any items are missing or
7 Regional power plugs
8 USB power adapter option for LED
9 USB cable, A to A, 2 m (6 ft)
10 Battery pack option for LED
11 Mounting hardware for panel mount (6x)
English 7