Enable - Helios KWL HygroBox Montage- Und Betriebsvorschrift

Operating and installation instructions
EN EN

9.6.5 ENABLE

In this menu item the unit enable can be configured. By default, the enable is preset via the automatic airflow detection.
As an alternative you can enable the unit via an additional external command. In this process, you can choose between a digital input
signal or an external Modbus connection see Electrical Connection: Chapter 13).
Note! The humidification mode always requires an airflow and recognition by the internal sensor.
KWL Hygrobox KWL HBX EH/WW
®
22