HOMCOM 371-042 Benutzerhandbuch Seite 43

ATTACH THE FRONT FENDER
❶ TPosition the front fender so the fender bracket is on the inside of
the frame. The fender is attached to the fork crown. Align the
hole in the bracket to the hole in the fork crown. Figure 2.4
❷ Place a washer on the bolt and insert the bolt through the
holes in the bracket and fork crown.
❸ Place a washer onto the end of the bolt.
Tighten with the hex nut.
❹
Align the holes on the ends of each fender brace with the
❺
small holes on the end of the forks. Insert a bolt into each
fender brace and tighten.
Bolt 2
42
3
Washer
4
1
Hex nut
Fender
bracket
Fender brace
Figure 2.4