MSW Motor Technics MSW-WDH-1500N Bedienungsanleitung Seite 19

a) Drive the dolly under the wheel. Slide the dolly, i.e. the roller supports,
close to each other.
b) Adjust the support column (5) so that the support arm (2) is above the
wheel.
c) Slide the dolly under the wheel so that the roller supports (8) are on both
sides of the wheel and the wheel itself rests on the support column (5).
d) Turn one of the gears until the wheel and the unit are in contact.
e) Lower the support arm (2) behind the wheel until it is locked, i.e. the
maximum swivel range is approx. 5 cm - so that it can be turned during
assembly to fit the rim holes.
Lock the support arm by tightening the width and height adjustment
locks (1 and 3).
CAUTION!