Input / Support; Input Menu; Support Menu; Self Diagnosis - Samsung LE40B620 Benutzerhandbuch

INPUT / SUPPORT

¦

Input Menu

❑
Source List
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
O
Press the SOURCE button on the remote control to view an external signal source. TV
mode can be selected by pressing the TV button, number buttons (0~9), and the P < / >
button on the remote control.
■ TV / Ext.1 / Ext.2 / AV / Component / PC / HDMI1 / HDMI2 / HDMI3/DVI / HDMI4
N
You can choose only those external devices that are connected to the TV. In the Source
List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected
will be sorted to the bottom.
N
Using the Colour buttons on the remote with the Source list
•
Red (Refresh): Refreshes the connected external devices. Press this if your Source is
on and connected, but does not appear in the list.
•
TOOLS (Tools): Displays the Edit Name and Information menus.
❑
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray
/ HD DVD / DMA
Name the device connected to the input jacks to make your input source selection easier.
N
When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 3 port, you should set the HDMI3/DVI mode
to DVI PC in the Edit Name of the Input mode.
N
When connecting an HDMI/DVI cable to the HDMI IN 3(DVI) port, you should set the HDMI3/DVI mode to DVI or DVI PC in
the Edit Name of the Input mode. In this case, a separate sound connection is required.
¦

Support Menu

❑

Self Diagnosis

■ Picture Test
If you think you have a picture problem, perform the picture test. Check the colour pattern on
the screen to see if the problem still exists.
●
Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.
There may be a problem with the TV. Therefore, contact Samsung's call centre for
assistance.
●
No: If the test pattern is properly displayed, select No. There may be a problem with your
external equipment. Please check your connections. If the problem still persists, refer to the
external device's user manual.
■ Sound Test
If you think you have a sound problem, please perform the sound test. You can check the sound
by playing a built-in melody sound through the TV.
N
If you hear no sound from the TV's speakers, before performing the sound test, make sure
Speaker Select is set to TV speaker in the Sound menu.
N
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the MUTE button.
●
Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV. Therefore, contact Samsung's call centre for assistance.
●
No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device's user manual.
English - 26
Source List
Edit Name
Source List
TV
Ext. 1 : - - - -
Ext. 2 : - - - -
PC : - - - -
AV : - - - -
Component : - - - -
Refresh T Tools
Self Diagnosis ▶
Software Upgrade
HD Connection Guide
Contact Samsung
Self Diagnosis
Picture Test ▶
Sound Test
Signal Information
U Move E Enter R Return