Maximum XO-410 combo Gebrauchsanleitung Seite 16

Step 4 B1
Installation – Cable (Only displayed if Cable is chosen)
possibility to type in the search criteria need in your cable network. These
settings can in most cases be found on the tv-operator's website.
- Frequency:
- Symbol rate:
- Constellation:
- Network search:
- Search range:
- LCN:
Note! It is not all operators that support LCN.
If Standard is selected then the receiver will automatically start searching for
channels. The search can be aborted by pressing the MENU button.
Here are the following options:
Operator, Manuel search, Standard
search.
Navigate with the arrow keys.
If manual is selected you will be given
Type in frequency in MHz
Type in Symbol rate in Kbps
Chose QAM number
Some operators offer to search their entire
network. If you wish to do that then select
ON.
All channels, Free channels, Scrambled
channel
Logical Channel Number. It is recommend
turning on this setting as this function make
makes sure that you channels automatically
will be sorted in a reasonable order and not
by frequency.
14
ENGLISH