Fairings
To reassemble the removed components according to the instructions described, please proceed following the reverse order of the
removal procedures.
Before carrying out the following operations and to avoid burns, leave engine and silencer cool off to room
temperature.
NOTE
Handle plastic and painted components with care:
•
Do not scratch or spoil them.
•
Do not force electrical cables.
INSTRUMENT AND CONTROL FUNCTIONS
Tail cover removal
1. Rest the vehicle on its stand.
2. Remove seat.
3. Unscrew and remove the 4 screws (1).
4. Unscrew and remove the 2 screws (2).
5. Remove the tail cover (3).
Middle cover removal
6. Unscrew and remove the 2 screws (4) in both sides.
7. Unscrew and remove the 3 screws (5) and collect the washer.
8. Remove the side panels (6).
31
E