Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha Digital Mixing Studio n8 Bedienungsanleitung Seite 59

Inhaltsverzeichnis

Werbung

2TR IN
To C-R OUT, STEREO bus
ST OUT
Outputs CH1–12, 2TR IN, DAW,
REVERB, RETURN signals
C-R OUT
The BASS MANAGEMENT function
works in the surround sound system
(Only n12).
AUX OUT (Only n12)
Outputs CH1-12, DAW, REVERB
Return, TALK BACK signals
PHONES (AUX, C-R)
DAW I/O
MIDI IN/OUT
Output Level Meter
Reverb
To AUX bus, REC bus, STEREO bus
DAW Remote Control
European models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 2.5 A (n12), 2 A (n8)
Conforms to Environments: E1, E2, E3, E4
Europäische Modelle
Käufer/Anwenderinformationen nach EN55103-1 und EN55103-2.
Einschaltstrom: 2.5 A (n12), 2 A (n8)
Einsatzbereiche: E1, E2, E3 und E4
Pour les modèles européens
Les informations acheteur/utilisateur sont spécifiées par les directives EN55103-1 et EN55103-2.
Courant d'appel : 2.5 A (n12), 2 A (n8)
Conformité aux normes environnementales : E1, E2, E3 et E4
Modelos europeos
Información comprador/usuario especificada en EN55103-1 y EN55103-2.
Intensidad de entrada: 2.5 A (n12), 2 A (n8)
Conforme para entornos: E1, E2, E3, E4
LEVEL Control
ON Switch
AD Converter
STEREO Fader
STEREO ON Switch
STEREO BAL Control
DA Converter
CONTROL ROOM LEVEL Control
C-R SPEAKER SELECT Switch
C-R SOURCE SELECT Switch
DOWN MIX Switch
DIMMER Switch
MUTE Switch
TALKBACK Switch
TALK BACK LEVEL Control
PFL Switch
DA Converter
AUX LEVEL Control
DA Converter
Maximum Output Level
Audio I/F
MIDI I/F
MASTER LEVEL METER
METER SELECT Switch
Type
Control
WORK MODE
MONITOR REMOTE
CLICK REMOTE
TRACK CONTROL
TRANSPORT
–∞ to +6 dB (to STEREO bus)/0 dB (to C-R)
ON/OFF
24 bit linear, Enhanced dual-bit delta/sigma conversion
n12
–∞ to +10 dB
n8
–∞ to +6 dB
ON/OFF
33 resolution
24 bit linear, 128 times oversampling advanced multi-bit delta/sigma
conversion
–∞ to 0 dB
n12
A (L/R), B (C/SW), C (LS/RS) Brackets ( ) indicate sources when 5.1
is selected as C-R SOURCE SELECT.
n12
5.1/DAW/STEREO bus/AUX bus/2TR IN
n8
DAW/STEREO bus/AUX bus/2TR IN
n12
ON/OFF (Active when 5.1 is selected as C-R SOURCE SELECT)
ON/OFF
ON/OFF
n12
ON/OFF
n12
–∞ to +6 dB, Sensitivity: –40 dB
ON (SOLO: Pre-fader)/OFF (SOLO: Post-fader)
24 bit linear, 128 times oversampling Advanced multi-bit delta/sigma
conversion
–∞ to +6 dB (to AUX bus), –∞ to +6 dB (AUX bus to AUX OUT)
24 bit linear, 128 times oversampling (@ fs = 44.1 kHz, 48 kHz), 64
times oversampling (@ fs = 88.2 kHz, 96 kHz) advanced multi-bit
delta-sigma conversion
LEVEL control for each AUX and C-R jacks
25 mW (@ 8 Ω)/75 mW (@ 40 Ω)
n12
16-ch input/16-ch output
n8
12-ch input/12-ch output
2-port input/2-port output
(DAW remote control, Input/Output via MIDI IN/OUT jacks)
1 port input/1port output
12 points LED meter × 6
n12
12 points LED meter × 2
n8
C-R level/Bus level
HALL/ROOM/PLATE
REVERB TIME, LEVEL
ST MIX/HARDWARE MIX/5.1 MIX (5.1 MIX is only for n12.)
Recording monitor: ON/OFF, VST effects (WET): ON/OFF
Click ON/OFF, CLICK LEVEL control
PREV, NEXT, REC READY switch
CYCLE, Previous Marker, Add Marker, Next Marker, REW, FWD,
STOP, PLAY, REC switch
Appendix
Owner's Manual
59

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Digital mixing studio n12N12N8

Inhaltsverzeichnis