Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Introduction
Specifications and Series
Model
Output Voltage
RND 790- 00001
0-30V*4
?
0-30V*4
Main Features
• Four independent output channels
• LIST programmable output sequence, 100 consecutive different settings
• LIST mode and normal mode can be switched automatically with one button
• Oscilloscope function for simultaneous display of voltage and current on four channels
• Oscilloscope screen capture via USB access to U disk
• U disk import and export output table data, and you can edit it by computer EXCEL
• Low chopping and low noise
• High resolution and precision with 5-digit display
• Remote measurement function
• External trigger control and switch control
• Supporting OVP, OCP and temperature protection
• Built-in USB/RS232/GPIB/LAN communication interfaces
CH1
OFF CV
00.000V
Vset:
0.0000A
Iset:
OVP:
00.000W
OCP:
CH3
OFF CV
00.000V
Vset:
0.0000A
Iset:
00.000W
OVP:
OCP:
CH1/LIST
CH2/LIST
2
Output Current
Output Power
0-5A*4
600W
0-5A*4
720W
CH2
OFF CV
00.000V
22. 800V
22. 900V
Vset:
4. 0000A
0.0000A
4. 1000A
Iset:
OF F
OF F
OVP:
00.000W
OF F
OF F
OCP:
CH4
OFF CV
00.000V
22. 000V
22. 100V
Vset:
0.0000A
4. 2000A
4. 3000A
Iset:
OF F
OF F
00.000W
OVP:
OF F
OF F
OCP:
CH3/LIST
CH4/LIST
USBC
onfigure
EN
1. CH1 channel indication, refers to the constant output mode of the channel. When entering the output
mode of dynamic LIST, it becomes LIST-1
2. Output voltage indication, refers to the actual output voltage value of CH1
3. Output current indication, refers to the actual output current value of CH1
4. Output power indication, refers to the actual output power value of CH1
5. OVP and OCP setting and switch status, when OCP and OVP are OFF, it shows OFF while it indicates
the set value when OVP and OCP are ON.
6. CH1 set value of voltage and current
7. Output ON/OFF indication, and constant voltage and constant current mode indication of
channel output
8. CH1 constant output and button indication of dynamic LIST output
9. CH2 constant output and button indication of dynamic LIST output
10. CH3 constant output and button indication of dynamic LIST output
11. CH4 constant output and button indication of dynamic LIST output
12. USB flash disk insertion indication. When the USB flash disk is inserted, the logo will appear as a
USB font.
13. System configuration and button indication of function configuration
Rear Panel Introduction
1. 4 channel voltage output terminal, GND is the earth terminal
2 -3 External control port, as shown below:
4. AC power input port
5. Vent
6. USB communication port
7. RS232 communication port
8. LAN communication port
9. GPIB communication port
EN
3
Werbung
