Protecting Your Unit From Theft; Removing The Front Panel - Pioneer AVX-7600 Anleitung

Section
04 Basic Operations
! SOURCE  Return to the picture adjustment
display for each source
# You can adjust the picture adjustment for rear
view camera only when B. CAMERA is turned on.
(Refer to Setting for rear view camera on page 13.)
# SOURCE will appear in the display instead of
BACK-CAMERA when you select
BACK-CAMERA.
# With some rear view cameras, picture adjust-
ment may not be possible.
3 Touch c or d to adjust the selected
item.
Each time you touch c or d it increases or de-
creases the level of selected item. +24  24 is
displayed as the level is increased or de-
creased.
4 Touch ESC to hide the touch panel keys.
Adjusting the dimmer
The adjustment of DIMMER is stored sepa-
rately for each ambient light; daytime, evening
and nighttime. The brightness of LCD screen
will be adjusted to optimum level automati-
cally in accordance with the ambient light
based on the setting values.
1 Press V.ADJ and hold to display
PICTURE ADJUST.
Press V.ADJ until PICTURE ADJUST appears
in the display.
2 Touch DIMMER.
The ambient light level used as the standard
for adjusting DIMMER appears above the level
bar.
! Yellow sun
bright ambient light (daytime)
! Red sun
termediate brightness (evening)
! Blue moon
dark ambient light (nighttime)
10
En
 Adjust the brightness for
 Adjust the brightness for in-
 Adjust the brightness for
3 Touch c or d to adjust the brightness.
Each time you touch c or d moves yellow to-
wards the left or the right.
The level indicates the brightness of the
screen being adjusted. The farther yellow
moves to the right, the brighter the screen.
4 Touch ESC to hide the touch panel keys.
Note
The icons indicating the current ambient bright-
ness used for adjusting BRIGHT and CONTRAST
may differ from DIMMER slightly.
Protecting your unit from
theft
The front panel can be detached from this unit
to discourage theft.
! If the front panel is not detached from this
unit within five seconds of turning off the
ignition, a warning tone will sound.
! You can turn off the warning tone. See
Switching the warning tone on page 13.
Important
! Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight and
high temperatures.
! If removed, replace the front panel on the unit
before starting up your vehicle.

Removing the front panel

% Move downward RELEASE and remove
the front panel toward you.
The LED indicator will flash while the front
panel is being detached.