Chauvet DJ COREpar Q60 ILS Schnellanleitung Seite 5

IRC-6
The COREpar Q60 ILS can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the COREpar Q60 ILS User Manual from www.chauvetdj.com.
Button
<BLACKOUT> Turns LEDs on/off
<AUTO>
BLACK
AUTO SOUND <SOUND>
OUT
<SPEED>
SENSI-
STROBE SPEED
TIVITY
<SENSITIVITY> Adjusts sound sensitivity
%
MANUAL FADE
<FADE>
R G B
<STROBE>
A UV W
<%>
-
+
0
<R,G,B,W>
1 2 3
4 5 6
<0>–<9>
7 8 9
<+>
<->
D-Fi USB Connectivity
The COREpar Q60 ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the
product's DMX Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi
USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display control/menu
buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
COREpar Q60 ILS QRG Rev. 3
QUICK REFERENCE GUIDE
Function
Enables snap and fade modes
Enables sound active mode
Increases and decreases speed
Fade program
Adjusts strobe speed
Adjusts brightness
Adjust percentage of red, green, blue, and white colors
1=C1 2=C20
6=C3 7=C23
Increases values for controls as described above
Decreases values for controls as described above
3=C5 4=C2
8=C6 9=C11
5=C8
0=C4
EN
4