Continuity Test - PCWork PCW02A Handbuch

Continuity Test

1. Turn the rotary switch to the measurement function "
select the continuity test function with the "FUNC." button. The
display will show "
2. Insert the red probe in the "
probe in the "COM" socket.
3. Connect the probes' tips to the measuring object.
4. The buzzer will signal if continuity is present (resistance is less
W
than 30 ±5 .) and the LED-indicator of the device will turn
green. In addition the resistance will be shown on the screen.
The LED-indicator will turn red, if the resistance is between
W W
30 and 50
range has been exceeded or the measuring circuit is defective.
", "OL" and the "
. If the screen shows "OL", the measurement
W
" symbol.
" socket and insert the black
22
" and