Steam Boost Function; Vertical Ironing; Energy Saving - Philips GC7844 Benutzerhandbuch

English
8
1 Press and hold the on/off button for 2 seconds until the light turns white.
2 To deactivate the TURBO mode, press and hold the on/off button for 2 seconds again until the light
turns blue.

Steam boost function

Use the steam boost function to remove stubborn creases.
1 Press the steam trigger twice quickly (Fig. 11).

Vertical ironing

Warning: Hot steam is emitted from the iron. Never attempt to remove wrinkles from
a garment while someone is wearing it (Fig. 12). Do not apply steam near your or
someone else's hand.
You can use the steam iron in vertical position to remove wrinkles from hanging fabrics.
1 Hold the iron in vertical position, press the steam trigger and touch the garment lightly with the
soleplate and move the iron up and down (Fig. 13).
Safe rest
Resting the iron while rearranging your garment
While rearranging your garment, you can rest the iron either on the iron platform or horizontally on the
ironing board (Fig. 2). The OptimalTEMP technology ensures the soleplate will not damage the ironing
board cover.

Energy saving

Eco mode
By using the ECO mode (reduced amount of steam), you can save energy without compromising on
the ironing result.
1 To activate the ECO mode, press the ECO button (Fig. 14). The green ECO light goes on.
2 To deactivate the ECO mode, press the ECO button again. The green ECO light goes out.
Safety auto-off mode (specific types only)
-
To save energy, the appliance switches off automatically when it has not been used for 5 minutes.
The auto-off light in the on/off button starts to flash.
-
To activate the appliance again, press the on/off button. The appliance then starts to heat up again.
Warning: Never leave the appliance unattended when it is connected to the mains.
Always unplug the appliance after use.