Temperature Unit - Hitachi PC-ARFP1E Installations- Und Betriebshandbuch

MENU OPERATION
3 Press " " or " " to select the language and press "OK". The
confirmation screen will be displayed.
Language Setting
OK
/
?
OK
/
?
4 Select "Yes" by pressing " " or " " and press "OK". The
setting will be confirmed and the screen will return to the
normal mode.
Language Setting
OK
/
?
OK
/
?
?
N O T E
If displayed language is changed, the registered room name and contact
information will be deleted.

8.19.3 Temperature unit

This function is used to change the temperature unit.
1 Select "Screen Display Setting" from the menu and press
"OK".
Menu
OK
/ ?
OK
/ ?
2 The "Screen Display Setting" screen will display. Select
"Temperature Unit" using " " or " " and press "OK".
The temperature setting screen will be displayed.
Screen Display Setting
OK
/
?
OK
/
?
62 PMML0496 rev.1 - 12/2020
English (EN)
Español (ES)
Deutsch (DE)
Français (FR)
Italiano (IT)
OK
Sel. Entr Rtrn
Initialize room name and
contact info when switching
language?
Yes No
Sel. OK Entr Rtrn
15:10(Fri)
Adjusting Date/Time
Daylight Saving Time
Setback Setting
Screen Display Setting
Function 20
Sel. OK Entr Rtrn
Display Adjustment
Language Setting
Temperature Unit
Main/Sub Display
Sel. OK Entr
3 By repeatedly pressing " " or " ", the indication is changed:
If "Temperature Unit" is selected it will change as follows :
"Degrees C" ↔ "Degrees F".
If "Temperature Width" is selected it will change as follows :
"0.5ºC" ↔ "1ºC". Press "OK" when all settings are complete.
01
/
OK
05
OK
When the selected language is English,Fahrenheit
temperature degrees can be selected.
4 The setting confirmation screen will display. Select "Yes"
using " " or "
The screen will return to the normal mode.
OK
OK
8.19.4 Main / Sub Remote Controller
This function is used to select Display/Non-display for "MAIN" or
"SUB" displayed on the normal mode screen.
?
N O T E
If the unit is set as "Non-display", it is possible to verify if the controller is
Main/Sub in the "Main/Sub-Remote" of the
04
Setting".
/
1 Select "Screen Display Setting" from the "Menu" screen and
05
press "OK".
OK
OK
2 The "Screen Display Setting" screen will display. Select
"Main/Sub Display" using " " or " " and press "OK".
It cannot be set if only the main controller is available or
Rtrn
when the display for "Main/Sub-Remote" in the
is shown as "−−".
Setting"
Temperature Unit
/
?
Temp. Unit : Degrees C
Temp. Width :
OK
Sel. Adj.
/
?
" and press "OK" to confirm the setting.
Temperature Unit
/ ?
Save changes to
temperature unit?
Yes No
/ ?
OK
Sel.
"9 Help Menu"
Menu
Adjusting Date/Time
/ ?
Daylight Saving Time
Setback Setting
Screen Display Setting
Function 20
Sel. OK
/ ?
0.5 ºC
Entr Rtrn
Entr Rtrn
"9.1 Current
15:10(Fri)
04
/
05
Entr Rtrn
"9.1 Current