Use Of The Oven - Küppersbusch EEB 6260.0 Bedienungsanweisung Mit Montageanweisungen

Note
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to changing conditions. Ensure that the
glass front control surface is clean and free of
any obstacles when turning on the oven.
If the clock does not respond correctly when you
touch the glass control, it will be necessary to
turn off the oven for a few seconds and then
turn it back on. By doing this, the sensors adjust
automatically and will react once more to fin-
gertip control.
Setting the Electronic Clock
When you connect the oven, you will notice that
12:00 will flash and the symbols
light up. Set the clock by touching the
symbols on the glass. You will hear 2 beeps con-
firming the time has been set.
To change the time, touch the
symbols together until the indicated time
flashes on the display. Adjust the time with the
or symbols.
The two beeps you hear after that will confirm
the new time has been set.
Manual Operation
After setting the clock, the oven is ready for use.
Select a cooking temperature and function by
pressing and turning the oven controls.
To turn off the oven, set the controls to 0. Push
down on the controls to conceal them.
10

Use of the Oven

Electronic Clock functions
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to pro-
gramme cooking time length, after which the
oven will turn off automatically.
Cooking Stop Time: This function allows you to
programme the time for cooking to stop, after
which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven turns
on automatically at the set time and operates
for the cooking time it has been programmed
for. It turns off automatically at the programmed
stop time.
Child Safety Function. This function locks the
and
oven, preventing small children from playing
or
with it.
Programming the Timer Alert
and
1 Touch the
will begin to flash. 0:00 will appear on the dis-
play and the
2 Set the alarm time by touching the
symbols.
3 2 beeps will then be heard. The
will flash and the display will show the time
left before the alert sounds.
4 An alarm will sound at the end of the pro-
grammed time.
5 Touch any symbol to stop the alarm. The
symbol will turn off.
symbol on the glass surface. It
and will light up.
or
symbol