3.10. IMAGE CHANGE KIT
The accessory consists of two distinct parts (Fig.19):
1. Component 1 is the mechanical part of the accessory, i.e. the one that makes the movement of the
effect possible.
2. Component 2 is the gobo change wheel, capable of holding up to 4 gobos
To insert the gobos into the wheel it is necessary to extract the clip, insert the gobo fully and reinsert the
clip locking the gobo (Fig.20).
The focus of the gobos depends on the type of gobo. To do this, a template is used which must be inserted
as shown inFig.21; once inserted, using another template, one acts on the single gobo holder ring nut until
the effect is that the firstFig.21offers a minimum of resistance to extraction.
Fig.19
Fig.20
Divum 50K
-20-