Trust START-LINE ACM-300 Bedienungsanleitung Seite 4

INSTALLATION
Wire colors may vary per country.
when in doubt about wiring.
MAXIMUM LOAD
Never connect lights or equipment that exceed the
maximum load of the receiver, as it can result in defects, a
short circuit or fire.
SHOCK HAZARD
Exercise caution when installing a receiver. Voltage may be
present, even when a receiver is switched off.
DIMMING
Only connect lamps that are suitable for dimming.
Do not connect a lamp with an integrated dimmer to
a Trust SmartHome dimmer receiver.
LIFE-SUPPORT
Never use Trust SmartHome products for life-support
systems or other applications in which equipment
malfunctions can have life-threatening consequences.
INTERFERENCE
All wireless devices may be subject to interference, which
could affect performance. The minimum distance between
2 receivers should be at least 50 cm.
LEGAL INFORMATION
CE: Trust declares this device complies with the Directives as listed in Section 2 of this document.
WEEE: Dispose of the device at a recycling centre. More information: www.trustsmarthome.com
Warranty information: www.trustsmarthome.com/warranty
REPAIRING
Contact an electrician Do not attempt to repair this product. There are no user-
serviceable parts inside.
WATER-RESISTANCE
This product is not water-resistant. Keep it dry. Moisture will
corrode the inner electronics and can result in a short circuit,
defects and shock hazard.
CLEANING
Use a dry cloth to clean this product. Do not use harsh
chemicals, cleaning solvents, or strong detergents.
HANDLING
Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
ENVIRONMENT
Do not expose the product to excessive heat or cold, as it
can damage or shorten the life of electronic circuit boards.
ACM-300 BUILD-IN DIMMER
EN
2