Herunterladen Inhalt Inhalt Diese Seite drucken

Product Information - Burigotto Leblon Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für Leblon:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
the pram.
• This product is designed to hold a
sleeping baby.
• Do not add or use mattresses
different from the original one.
COMBINED WITH CHASSIS:
• This product is compatible with
the following original PegPerego
products: Ypsi Chassis.
• WARNING: never leave the child
unattended.
The images referring to the textile details may
differ from the collection purchased.
INSTRUCTIONS FOR USE
Using the pram
1 When closed, the pram is easy to carry thanks to the mesh
handle present on the product, as illustrated.
2 To open the pram, press the button at the rear and lift the
pram up;
3 Push the backrest back until the pram is fully open.
4 To finish assembling the pram:
lower the hood, pressing the two side buttons at the same
time;
5 Remove the mattress (Fig. a) and push the hooks all the
way until they fasten to the two blocks (Fig. b).
6 HOOD: Lift the hood until it clicks into place. It comes
with a further section that can be drawn out for more
protection.
7 Open the zip and raise a section of the hood to reveal a
mesh insert ensuring greater ventilation for your child and
enabling you to keep a better eye on your baby.
8 FOOT MUFF: Fit the foot muff and fasten it to the sides at
points a and b as illustrated and explained below.
9 Fasten the foot muff to the Velcro to the side of the pram
(a)
10 Button the foot muff to the pram's hood (b).
11 CARRY HANDLE: the handlebar comes with a carry handle.
Before lifting the pram, ensure the hood is in the correct
position for carrying.
12 To fasten the pram, position it on the frame and press down
with both hands until it clicks into place.
Always enable the brake on the frame before fastening and
unfastening the pram.
IMPORTANT: Ensure the pram is properly fastened.
13 To release the pram, lift the two side levers on the joints,
first on one side and then on the other (arrows 1 and 2),
and release it from the frame (arrow 3).
14 CLOSING THE CHASSIS WITH THE PRAM ATTACHED:
- Lower the hood completely and remove the foot muff (if
attached)
- Lift the mattress (Fig. a)
- Release the two hooks from the blocks by pushing the
hooks inwards (Fig. b)
- Reposition the mattress in the pram (Fig. c)
15 Press the handle at the far end and
16 fold the pram forwards to close it completely.
17 Move the lever on the front of the handlebar to the left
(Fig. A) and fully press the central key on the rear of the
handlebar (Fig. b).
18 Close the chassis by rotating the handlebar forwards (Fig.
c), releasing the two keys and lowering the frame (Fig. d).
The chassis is now closed.
19 For the chassis to be closed properly, the side hook must
be engaged.
20 It may be carried with ease using the handy carry handle.

PRODUCT INFORMATION

21 Information about the product may be found on the body,
under the fabric. This information is essential in the event
of a claim.
This information is essential in the event of a complaint.
12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis