Garmin K 5X Schnellstartanleitung Seite 4

Adding a Dog to the Alpha
1 If the dog collar device is on, turn off the dog collar device.
2 Hold the power key on the dog collar device until the device emits two series of beeps (about 2 seconds),
and then release the power button.
The status LED flashes rapidly in green. The dog collar device is now ready to be linked, or paired, with a
handheld device.
3 On the handheld device, select Dog List > Add Dog.
4 Select an option:
• If you are near the dog collar device, select Pair Collar, and follow the on-screen instructions.
• To pair a dog collar device by receiving the information from another handheld device, select Receive
from Handheld.
NOTE: To successfully pair the device, the other handheld device must be wirelessly sharing the dog collar
device information.
5 After successfully adding the dog collar device, enter the name of the dog, and select
4
Handheld Using Wireless Pairing
®
.
Quick Start Manual