Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
VC-CJS71 4 in 1 Jump Starter System with Air
Compressor
Item no: 2436040
1 Intended use
The product is a jump starter for petrol (max. 8L) and diesel (max. 6L) engines. Other features include:
■
LED light
■
Power bank
■
Air compressor
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
Air hose
■
"Smart" starter cables
■
USB-C
TM
to USB-A charging cable
3 Latest product information
Download the latest product information at
www.conrad.com/downloads
low the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important informa-
tion in this document. Always read this information carefully.
Read the operating instructions carefully.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Do not switch the product on after it has been taken from a cold to a warm environment. The con-
densation that forms might destroy the product. Allow the product to reach room temperature before
you use it.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the appliance.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
4
■
3x valve connectors
■
Operating instructions
or scan the QR code shown. Fol-
5.5 Li-ion battery
■
Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might
cause an explosion or a fire!
■
Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product
into fire. There is a danger of fire and explosion!
■
Charge the rechargeable battery regularly, even if you do are not using the product. Due to the re-
chargeable battery technology being used, you do not need to discharge the rechargeable battery
first.
■
Never charge the rechargeable battery of the product unattended.
■
When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain
amount of heat is generated during charging.
5.6 LED light
■
Do not look directly into the LED light!
■
Do not look into the beam directly or with optical instruments!
5.7 Connected devices
■
Also observe the safety and operating instructions of any other devices which are connected to the
product.
6 Product overview
6.1 Product
10
11
12
Output 2
Input
Air Hose
Output 1
Connector
14
1
Display
3
increase button
5
power button
7
mode select button
9
Air hose (storage)
11
Output 2: Charger output (USB-A)
13
Air Hose Connector: Air hose connector:
6.2 Starter cables
A
B
D
C
E
A
Starter status indicator
C
Force start button
E
Black starter clip (-)
13
2
Carry handle
4
light button
6
decrease button
8
Light panel
10
Charging: Charging input (USB-C
12
Starter cables socket
14
Output 1: Charger output (USB-A)
B
Starter cables plug
D
Red starter clip (+)
1
2
3
4
5
6
7
8
9
TM
)
Werbung
Inhaltsverzeichnis
