SUSPENDED INSTALLATION
Important safety notice: Overhead mounting requires extensive experience, including the calculation of the load limit values
of the installation material and regular safety inspection of all installation materials and spotlights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional.
For suspended installation, the mounting bracket can be removed completely to create a consistent and discreet appearance.
To do this, loosen and remove both knob screws
mm Allen key. Cover the mounting holes
A
To suspend the spotlight, only the securing lug
E
from the mounting bracket. Remove the sockets
A
C
with the sliding metal strips in the grooves
B
and an appropriate suitable security cable should be used.
E
on each side of the spotlight with a 3
B
D
. Keep all removed components safe for later use.
C
D
15