VOTOMY VT360 Bedienungsanleitung Seite 10

IMPORTANT NOTE:
water-resistant, please remove all the connected cables and close the
port protection cover tightly.
Reset the speaker:
please disconnect the charging cable, long press the button " " and
hold it for 10 seconds until the LED light off.
Bluetooth version: 5.0
•
Support: A2DP V1.3; AVRCP V1.6, HFP V1.7
•
Wireless working distance: 10 meters
•
Power output: 15W x 2
•
Driver unit: Φ55mm
•
Frequency response: 70Hz~18kHz
•
Signal-to-noise ratio: ≥70dB
•
DC input voltage/current: Micro USB DC 5V/2A
•
Playtime: ≥12 hours (50% volume)
•
Battery charge time: ≤4 hours (5V/2A)
•
Dimensions: 204x75x85mm / 8.03x2.95x3.34inch
•
Weight: 712g
•
Keep the speaker and its accessories away from the reach of
•
children to avoid choking or strangling.
Keep the speaker away from re, water, liquids, extreme heat,
•
and strong magnetic elds to avoid damage to the device.
Do NOT use this speaker at high volume for extended period
•
of time as this may cause permanent hearing damage or
hearing loss.
To ensure the speaker is prepared to use for
If the control buttons are not working properly,