G) Steering - Reely titan Bedienungsanleitung

g) Steering

SR2
This part is delivered preassembled and only part "C1"
has to be inserted into the sleeve "C3" from the bottom
so that the steering can be installed on the chassis plate.
See illustration on the right.
Use two countersunk screws (M3x6mm) to screw the steering to
the chassis as shown in the illustration bottom right.
The servo saver (part with a spring "C7") serves to protect the servo
from acting forces transmitted through the steering.
56
C7
C4
C6
C5
C2
SR1
C1
SR2
C3