Reflexion LDDW190+ Bedienungsanleitung Seite 64

Satellite Edit
Signal Information
CI Information
LCN
Software Update
(USB)
Auto Tuning
Satellite:

Normally, no setting needs to be made in this menu.
Adjusting the settings is only recommended for
experienced users.
Red button:

Delete selected satellite.
Yellow button:

Add a satellite.
OK button:

Opens the settings of the selected satellite. The following
settings can be viewed and edited in the menu.

Satellite Name

Orbit Position

LNB Type

DiSEqC1.0

DiSEqC1.1

Tone 22KHz

Transponder

Unicable settings

Motor

Band
Shows reception information of the selected station. Only active
if a station has been found.
Displays information about the inserted CI module and the card.
Only active when a CI module is inserted. The module and card
are not included in the scope of delivery and must be purchased
separately from the reception provider.
LCN: Set the LCN On or Off. If LCN is set to On, the yellow button
is not displayed in the edit channel menu.
Start the software update.
DVB-T
Tune Type:

DTV + ATV / TV / ATV
Select country:

Select the country according to the installation site.
Press the button to start the search.
64
UK