Electrolux EH7L5DSP Benutzerinformation Seite 44

6.2 Setting the function: BakingPlus
WARNING!
Risk of burns and damage to the appliance.
Step 1 Make sure that the oven is cold.
Step 2 Fill the cavity embossment with tap wa‐
ter.
The maximum capacity of the cavity
embossment is 250 ml. Do not refill the
cavity embossment during cooking or
when the oven is hot.
Step 3 Put food in the oven.
Refer to "Hints and tips" chapter. Do not open the oven door during cooking.
Step 4
Set the function:
Step 5 Turn the control knob for the temperature to set temperature.
Step 6 Turn the knob for the heating functions to the off position to turn off the oven.
Step 7 After the function ends, carefully open the door. Released humidity can cause burns.
Step 8 Make sure that the oven is cold. Remove the remaining water from the cavity embossment.
6.3 Heating functions
Heating func‐ Application
tion
The oven is off.
Off position
To turn on the lamp.
Light
To bake on up to three shelf po‐
sitions at the same time and to
dry food.
True Fan Cooking
Set the temperature 20 - 40 °C
lower than for Conventional
Cooking.
To bake pizza. To make inten‐
sive browning and a crispy bot‐
tom.
Pizza Function
44 ENGLISH
.
Heating func‐ Application
tion
To bake and roast food on one
shelf position.
Conventional
Cooking
This function is designed to
save energy during cooking.
When you use this function, the
Moist Fan Baking
temperature in the cavity may
differ from the set temperature.
The residual heat is used. The
heating power may be reduced.
For more information refer to
"Daily Use" chapter, Notes on:
Moist Fan Baking.
To bake cakes with crispy bot‐
tom and to preserve food.
Bottom Heat
To add humidity during the
cooking. To get the right colour
and crispy crust during baking.
BakingPlus
To give more juiciness during
reheating.