Use - Miele HS14 Gebrauchsanweisung

en
Using the accessories sup‐
plied (dia. 15)
 Dusting brush with natural bris‐
tles (only available in selected
countries)
For cleaning skirting boards, or‐
nate and carved objects.
The head can be swivelled to ad‐
just the angle.
 Upholstery nozzle
For cleaning upholstery, mattress‐
es, cushions, curtains, covers etc.
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Accessories holder for the
above accessories (dia. 16)
Symbols on the holder show
where to attach the different ac‐
cessories.
 Attach the accessories holder to the
suction hose where it joins the handle
or to the hose connecter socket on
the vacuum cleaner. Make sure it
clicks into position.
Certain models are supplied as stand‐
ard with the following accessories
which are not illustrated on this page.
– Classic Allergotec floorhead
– Turbobrush
These are supplied with their own oper‐
ating instructions.
AllTeQ / EcoTeQ floorhead (dia. 17)
For general use and also for vacuuming
the stairs.
38

For safety reasons when vac‐
uuming stairs it is best to start at the
bottom of the stairs and move up‐
wards.

Use

Unwind the mains cable (dia. 18)
 Pull the mains cable out to the re‐
quired length (max. cable length ap‐
prox. 6.5 m).
 Insert the plug into the socket cor‐
rectly and switch on.

If vacuuming for longer than 30
minutes, the mains cable must be
pulled out to its fullest extent. Other‐
wise there is a danger of overheating
and damage.
To rewind the cable (dia. 19)
 Switch off at the wall socket and re‐
move the plug.
 Press the rewind foot switch briefly.
The cable will rewind automatically.
To switch on and off (dia. 20)
 Press the On/Off foot control .
To regulate the suction power
(dia. 21)
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to ma‐
noeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.