Other Setting - Nexigo PJ06 Bedienungsanleitung

4. The software will update automatically. Do not try to use or turn
off the projector until the update is complete. Interfering with the
update process may damage the projector.
Note: Updating firmware typically is not required and will only be
necessary if instructed to do so by the NexiGo technical support team.
The projector will reset after the software updates and all saved
settings will be erased.
Restore Factory Default:
settings.
Sleep Timer: Set the time duration for the projector to shut down
automatically.

OTHER SETTING

Picture Setting
System Setting
Other Setting
OSD Timer: Set the time duration for the OSD menu to switch to
the home page automatically.
EN 13 US 01
Reset the projector to factory default
OSD Timer