ERP power management
The unit will turn off automatically after 15 minutes in standby mode if there is no audio
signal. To turn on the unit again press the "
POWER ON / OFF
Press the "TUNER/SELECT/SNOOZE" button to turn on the unit.
Press the "TUNER/SELECT/SNOOZE" button again to turn off the unit in standby mode.
SELECTING MODES
During playing, press the "POWER ON/STANDBY/SOURCE" button repeatedly to switch
between the modes.
ADJUSTING VOLUME
Turn the "VOLUME/SCAN" knob to decrease or increase the volume.
Turn the unit on and press the "POWER ON/STANDBY/SOURCE" button repeatedly until
"DAB" is shown in the display.
1. If no station scan is done (e.g. the automatic update function was terminated) the unit will
start an automatic scan. The display show "Scanning
found radio stations. Together with a slide bar which indicates the process status.
If you want to start an automatic scan, press the "VOLUME/SCAN" button.
2. To listen a scanned radio station, turn the „TUNER/SELECT/SNOOZE" knob to select the
desired station. To confirm the desired station, press the "TUNER/SELECT/SNOOZE" the
unit plays the selected station.
Store a preset station
1. Select the desired radio station.
2. Press and hold the "PRESET" button and choose with the "TUNER/SELECT/SNOOZE "
knob the station number where the radio station should be saved. You can store max. 30
radio stations!
3. Press the "TUNER/SELECT/SNOOZE" knob to store the station. "PRESET (X) STORED" is
shown in the display.
Recall a preset station
1. Press the "PRESET" button and select with the "TUNER/SELECT/SNOOZE" knob the
desired station number.
2. Press the "TUNER/SELECT/SNOOZE" knob to confirm the selection. The radio station will
be played.
DAB Information
During DAB mode press the "INFO/MENU" button repeatedly to show the following information:
Time
Date
Multiplex/frequency
BASIC OPERATIONS
Song information
Station name
" button.
DAB
0", the ">" the number show the
Signal level
Error rate
Audio bit-rate.
2
UR2022 / English Instruction Manual
Genre