Cleaning And Maintenance - Inventum AKB9015ZWA Benutzerhandbuch

3. Touch the timer button to start. The display flashes 0.
Note:
If you do not select a level within 20 seconds, the appliance will continue to operate.
4. Use the up button or the down button to select the level.
5. Touch the timer button to confirm the setting.
The display shows the set speed and a flashing dot.
6. Touch the timer button again to cancel the mode.
USING THE REFRESH CONTROL FUNCTION
1. Touch and hold the up button for 3 seconds to activate the refresh control function.
2. The dot flashes and the display shows 1..
The refresh control function now works for 24 hours.
ACTIVATING THE SMELL CONTROL FUNCTION
Note: When the smell control function is activated, the automatic switch-off mode can not be set.
1. Make sure that the appliance is on standby. The display shows a dot.
2. Touch and hold the down button for 2-3 seconds to activate the smell control function.
The display shows A.
When the appliance is activated by the smell sensor the display shows: 1., 2. or 3..
Deactivating the smell control function
1. To deactivate the smell control function, stop the appliance.
2. Hold the down button for 2-3 seconds.
USING THE LAMP
1. Touch the lamp button to activate or deactivate the lamp.
2. Hold the lamp button to dim the lamp.
STOPPING THE APPLIANCE
Note:
Make sure that the appliance operates for 5 to 10 minutes after you finish cooking.
1. Touch the decrease button to stop the appliance.
6

Cleaning and maintenance

SAFETY INSTRUCTIONS FOR CLEANING AND MAINTENANCE
Warning:
Clean the appliance and the grease filters regularly. Failure to do so may result in fire.
English • 33