Philips AC4072 Benutzerhandbuch Seite 17

5
Note: Do not touch the pleated filter surface, or smell the filter as it has
collected pollutants from the air.
Note: Wash your hands after disposing of the used filters.
6
Note: Make sure that the side with the tag is pointing towards you.
7
Note: Make sure that the side with the two projections is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
8
2
9
1
10
Note: You do not need to press the filter reset button after cleaning filter 1
(pre-filter).
Note: You cannot reset the appliance when you replace a filter before its filter
replacement light starts flashing.
Note: You cannot reset the appliance if it is not plugged in and switched on.
storage
To store the mains cord, wind it round the cord storage facility at the
bottom of the appliance.
Discard the filter that needs to be replaced and unpack the new
filter.
Put filter 2 (multi-layer filter) back into the appliance.
Put filter 1 (pre-filter) back into the appliance.
To reattach the front panel, insert the bottom hooks into the bottom
of the appliance first (1). Then push the panel against the body of the
appliance (2).
Put the plug in the wall socket and switch on the appliance again.
Press the filter reset button with a thin tool.
English
15