Band Selection; Gprs Settings; Reset Settings - LG KG220 Benutzerhandbuch

Settings

Band selection

EGSM/DCS
According to depending on Network situation, you
can select EGSM/DCS.
PCS only
According to depending on Network situation, you
can select PCS only.
GPRS setting
You can set the GPRS service depending on various
situations.
Switch on
If you select Power on and you are in a network that
supports GPRS, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data
connection, for example, to send and receive a
multimedia message is quicker.
66
When needed
(Menu 9.5.2)
If you select When needed , the phone will use a
(Menu 9.5.2.1)
GPRS connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is no longer required by any application.
(Menu 9.5.2.2)

Reset settings

You can initialise all factory defaults. You will need
the Security code to activate this function.
Menu 9.6
Memory status
You can check the status of memory in use.
(Menu 9.6.1)
(Menu 9.6.2)
Menu 9.7
Menu 9.8