Gymrex GR-MG120 Bedienungsanleitung Seite 25

a) Loosen the handlebar height adjustment knob (13). Slide the front adjustment
support (14) into the hole axis. Lock in place by tightening the knob.
GR-MG126 Model Before installing the support in the frame hole, connect the
LCD panel sensor wires located inside the frame.
b) Attach the handlebar (25) to the support (14) using the washers (18) and the
mounting screws (19).
c) Place the LCD panel (15) in the central part of the handlebar (16) and fix it with
screws
the LCD
GR-MG121, GR-MG124, GR-MG125 Model assemble the LCD panel base first.
Then follow the same procedure.
GR-MG121, GR-MG122, GR-MG125
To mount it, place it on the handlebar frame and press down.
CAUTION! When connecting the wires, the connecting parts should be on
the same side!
STEP IV
(17). Connect
panel (15)
the sensor
and the main
Model has
cable (20)
frame of the
a phone
to
device.
holder.