Pair Instruction; Remote Control; Led Lights - Modster SC L7 Betriebsanleitung

User Manual

PAIR INSTRUCTION

The first step is to connect the board and the remote control.
Before you start, make sure that the board and the remote control are switched off.
Switch on the board.
Press the power button for 5 seconds until the light of
the power button starts flashing.
Turn on the remote. Press the pairing button, the signal
indicator will flash.
Push the joystick to test acceleration and braking.

LED LIGHTS

Activation/deactivation by pressing the reverse button on the remote control for 3 sec.
16
MODSTER SC L7
www.modster.at