POICON POI PILOT 5500plus Bedienungsanleitung Seite 64

plus
display brightness: The LED shows
the current display brightness
settings. The brightness can be
adjusted for day and nighttime
Press M 5 times
journeys using the < > keys.
Range of settings: OFF (0) to 4 (0 =
display off , 4 = brightest setting)
Factory setting: 1
time zone setting: The LED shows
the current time zone (UTC). The
time zone can be changed using
the < > keys.
Press M 6 times Factory setting: +1h (=CET, Central
European Time, e.g. Germany,
Austria, Switzerland, France).
Note: 0h = GMT, Greenwich Mean
Time, e.g. Great Britain
Panic button: If you want to delete
all installed POIs (speed cameras
and other dangers and points of
interest) from the device, select
this option. You can only use this
Press and hold < and
function within the fi rst 10 seconds
> simultaneously for
of turning the device on. You
2 seconds
may therefore need to turn the
device off and on again to use this
function. You can always reinstall
POI locations onto your POI Pilot
using the POIbase software.
104
All manuals and user guides at all-guides.com
English
plus
Restore factory settings: You
can use this function to restore all
Press and hold < + M
settings on your POI Pilot to their
+ > for 2 seconds
original states. The POI data you
have installed will not be deleted.
Saves your current GPS position
in order to create a new hazard or
Hold M for 2 seconds
point of interest (only works while
moving and not whilst stationary)
Adjusts the volume of
announcements, LED shows the
Press < or >
current volume, adjustable between
0 (off ) and 3 (loudest)
Battery test, Voice announcement
tells you how full the battery is
Press and hold > for
(high charge level, normal charge
2 seconds
level, low charge level, very low
charge level)
If no button is pressed, the LED
Press nothing returns to the previous display
mode after 7 seconds
English
105