SUPAIR ACCESS 2 BUMP Betriebshandbuch Seite 53

Harness User's manual | ACCESS 2 BUMP
Fastening the risers to the harness with a set of 6mm square Maillons Rapides®.
1
- Open the 6mm Mail- - Push the riser con-
lon Rapide® necting point through
the toric ring loop
- Push the toric ring
through the Maillon - Push the riser in the
Rapide® 6mm Maillon Rapide®
- Twist it
INSTALLING THE RESERVE PARACHUTE
Riser/Harness connection
2 3
- Give the toric ring a
second twist
4
- Push the riser end - Check that the risers do not move
loop through the Mail-
lon Rapide® - Close the Maillon Rapide® by hands
and tighten with a 1/4 turn using set of
pliers
- Repeat the procedure with the second
riser
5
ACCESS 2 BUMP | page 15