Mains Part; Replacement Parts And Wearing Parts; Warranty / Service - Beurer BM 40 onpack Gebrauchsanweisung

safety and essential performance of automated non-invasive
blood pressure monitors).
• The accuracy of this blood pressure monitor has been care-
fully checked and developed with regard to a long useful
life. If using the device for commercial medical purposes, it
must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested
from the service address.

11. Mains part

Model no. LXCP12-006060BEH
Input 100 – 240 V, 50 – 60 Hz, 0.5 A max
Output 6 V DC, 600 mA, only in connection with
beurer blood pressure monitor.
Supplier Shenzhen Iongxc power supply co., ltd
Protection This device is double insulated and pro-
tected against short circuit and overload by
a primary thermal fuse.
Make sure to take the batteries out of the
compartment before using the mains part.
Polarity of the the DC voltage
connection
Double insulated / equipment class 2
Enclosures and Equipment enclosed to protect against
Protective Covers contact with live parts, and with parts
which can become live (finger, pin, hook
test).
The operator shall not contact the patient
and the output plug of AC mains part simul-
taneously.

12. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the
corresponding listed service address under the stated material
number.
Designation
Standard cuff (22-35 cm)
XL cuff (30-42 cm)
Mains part (EU)
Mains part (UK)

13. Warranty / service

Further information on the guarantee and guarantee condi-
tions can be found in the guarantee leaflet supplied.
28
Item number and/or
order number
162.972
162.973
071.95
072.05