Setting The Process Time; Setting Stock Removal (Accessory) - struers AbraPlan-10 Gebrauchsanweisung

Setting the Process Time

Setting Stock Removal
(accessory)
20
AbraPlan-10
Instruction Manual
Turn knob to select Process time setting.
D
D
Push knob to display square brackets [ ] and turn knob
to change the Process time setting.
Note that stock removal is not available when process
D
time is selected.
Push knob to accept the new value.
D
Turn knob to select Stock removal setting.
D
D
Push knob to display square brackets [ ] and turn knob
to change the Stock removal setting.